优质低价广东无隔板高效过滤器 高效过滤器厂家

无隔板高效过滤器
产品特性：
*主要用于过滤0.3um以下的空气悬浮颗粒，作为各种过滤系统的末端过滤；
*采用**细玻璃纤维滤料，热溶胶为分隔物，**铝型材外框，聚氨酯双组份密封胶，闭孔海绵密封条，喷塑钢网匀流板等经过严格的工艺精制而成；
*多褶式的滤料可以形成通风气流通道，增加滤料面积和送风量，降低送风的阻力；
*具有过滤效率高、阻力低，容尘量大，风速均匀性好，通用性强、安装方便等优点；
*耐温80℃，耐湿80%；
*每台无隔板高效器在出厂前均经过逐台性能测试，保证高效空气过滤器的性能指标；并可按用户要求，制作各种非标准规格尺寸和过滤要求的高效空气过滤器；
用途：
广泛用于电子、半导体、精密机械、制药、医院、食品等行业中对洁净度要求较高的民用或工业洁净场所的末端过滤。
Mini-pleated HEPA filter
Specialty:
* Mini-pleated HEPA filter can collect 0.3 Micron or below particles and used as the terminal filtration.
* Processed by super fine fiberglass media separated by hot-melt adhesive with double polyurethane gasket. Inside sponge can avoid any leakage. Injection molding mesh can protect the inside media very good.
* The pleated type can form a ventilation channel, increase filtration area and airflow, decrease the resistance.
* Featured with high efficiency and dust holding, low resistance, uniform airflow, easy installation.  
* Temperature resistance: 80℃, relative humidity is 80%.
* Tested via PSL particle, Using MPPS (DOP Test) laser particle counting device to measure overall efficiency of the filter.
Application:
Mini-pleated HEPA filter is widely used as terminal filter in top grade purifying equipments of Electronics Factory、 semiconductor、precision mechanism、pharmaceutical factory、hospital、food sanitation etc.
技术参数：Specification
型号Type	规格Size(mm)
(宽x高x厚)	额定风量Rated Airflow(m3/h )	过滤
面积Filter Area(m2)	容尘量Dust Holding Capacity(g/m2)	初阻力Initial Pressure Drop(Pa)	终阻力Final Pressure Drop(Pa)	效率Average Arrestance
FX-HU	484x484x50	500	4.6	300	≤220	400	≥99.99%
	610x610x50	800	7.5	450	≤220	400	≥99.99%
	305x305x69	260	2.5	150	≤220	400	≥99.99%
	484x484x69	700	6.6	400	≤220	400	≥99.99%
	610x610x69	1100	10.7	650	≤220	400	≥99.99%
	915x610x69	1600	16	950	≤220	400	≥99.99%
	1220x610x69	2200	21.3	1000	≤220	400	≥99.99%
	610x610x90	1500	14.9	900	≤220	400	≥99.99%
	915x610x90	2000	22.3	1200	≤220	400	≥99.99%
	1220x610x90	2800	29.8	1800	≤220	400	≥99.99%

注:可根据需要定制不同规格. Note: Special Size Available Upon Request.